Ironer (Garment Presser) Resume Examples & Writing Guide
An ironer resume gets a call back when it shows output and care of the goods: how many pieces you finish an hour, which machines you run (flatwork ironer, utility press, form finisher, steam tunnel), how few items come back for rework, and that you show up for the shift. Below is a full sample you can copy.
Ironer and garment presser resume example
This sample is for someone with about ten years in laundry finishing: nursing home linen first, then a dry cleaning store, now a large hotel and uniform plant. The name and the employers are made up. Copy the shape of it and put your own machines, piece counts and shifts in.
One note on job titles. In the UK and Ireland this role is usually advertised as ironer or laundry operative. In the US the same work is posted as presser, finisher, garment presser or laundry attendant. Put the title from the posting at the top of your resume and mention the other word once further down, so both searches find you.
Marisol Reyes
Garment Presser / Laundry Finisher
Charlotte, NC · (704) 555-0163 · marisol.reyes@email.com · Available 1st and 2nd shift
Summary
Laundry finisher with 10 years of pressing and ironing across healthcare linen, dry cleaning and hotel work. Currently runs a three-roll flatwork ironer and a form finisher on a 750-piece shift with a rework rate under 2%. Trained on utility press, steam tunnel, spotting board and shirt unit. OSHA 10 card and forklift certification. Reliable early starts, 98% attendance over three years.
Experience
Garment Presser / Flatwork Operator · Regional hotel and uniform laundry (280,000 lb per week)
Feb 2021 – Present
- Feed and catch a three-roll flatwork ironer running 900–1,100 sheets and duvet covers per hour for 14 hotel accounts, working to the plant's 2-person feed standard.
- Finish 700–800 uniform pieces per shift on a form finisher and utility press (chef whites, housekeeping tunics, front-desk blazers), keeping rework under 2% against a 4% plant target.
- Check every garment against the account's finish spec before it goes on the rail: crease placement, collar shape, no shine on dark polyester, no double creases on sleeves.
- Trained 6 new pressers on press guarding, two-hand controls and lockout/tagout; all 6 cleared their 30-day production review.
- Zero recordable injuries in 5 years on heated equipment; logged 3 machine faults that maintenance fixed before they cost a shift.
Presser and Counter Assistant · Four-store dry cleaning chain
Jun 2018 – Feb 2021
- Pressed 180–220 garments a day on a shirt unit, legger, topper and utility press, including wool suits, silk blouses, pleated skirts and lined jackets.
- Handled spotting on the board for light stains (protein, tannin, oil) using the store's chemical chart, saving about 15 garments a week from going out for reprocessing.
- Kept customer complaints on finishing at 1 or fewer a month across roughly 4,500 garments.
- Assembled, bagged and tagged orders and matched them to the ticket, with no mis-delivered orders in the last 18 months.
- Covered the front counter at peak times and handled 40–60 drop-offs and pickups a day in Spanish and English.
Laundry Attendant / Ironer · 180-bed skilled nursing facility
Aug 2016 – Jun 2018
- Washed, dried, ironed and folded about 1,200 lb of resident clothing and bed linen a day on a 5-person team.
- Ironed and sorted personal clothing for 180 residents with name labels, with fewer than 5 lost items a quarter.
- Followed the facility's soiled-to-clean flow and bloodborne pathogens procedure, including PPE, cart separation and no cross traffic between sides.
- Recorded wash temperatures and chemical levels on the daily log; passed 4 state surveys with no laundry findings.
Education
High school diploma
East Mecklenburg High School, Charlotte, NC, 2016
OSHA 10-Hour General Industry card
OSHA-authorized trainer (employer sponsored), 2022
Certifications
- OSHA 10-Hour General Industry (2022)
- Powered industrial truck (forklift) operator certification, employer issued (renewed 2025)
- Bloodborne pathogens training (annual, healthcare laundry)
Skills
What a laundry or dry cleaning manager checks first
Plant supervisors and store owners hire fast and read fast. Four things decide whether they call you.
- Output. "Ironed clothes" tells them nothing. "180–220 garments a day on a shirt unit and utility press" tells them what your hands can do. Every plant tracks pieces per hour, so give them a number.
- Damage and rework. A fast presser who scorches wool or puts a shine on a dark suit costs more than a slow one. Rework rate, customer complaints, or "no damage claims in two years" is the strongest line you can write.
- Which machines you have actually run. A flatwork ironer, a shirt unit, a form finisher and a hand press are four different skills. Name them. If you have only ever done hand ironing, say that honestly and say what you can pick up.
- Attendance and shift. Finishing is the last step before delivery, so a missing presser holds up the whole route. If your attendance is good, or you can work 5 a.m. starts, weekends or overtime in peak season, put it in the summary.
“I can train someone on the press in a week. What I cannot fix is a person who burns two blazers a shift or calls out every Monday. Show me your piece count and your damage record and I will bring you in the same day.”
Resume summary examples for an ironer or presser
Three or four lines under your name. Say how long you have done it, which machines, how much you finish and what your quality looks like. Pick the version closest to your situation and swap the numbers.
Laundry finisher with 8 years in high-volume plants, currently feeding a four-roll flatwork ironer for hotel linen at 1,000+ sheets an hour. Trained on steam tunnel, form finisher and utility press. Rework under 2%, no damage claims in three years. Works 5 a.m. starts and peak-season Saturdays.
Dry cleaning presser with 6 years on shirt unit, legger, topper and utility press, finishing 200 garments a day including wool suits, silk and pleated skirts. Handles spotting for protein, tannin and oil stains. Under one finishing complaint a month on roughly 4,000 garments.
Laundry attendant with 5 years in a hospital linen department processing 1,500 lb a day. Ironed and sorted patient gowns, drapes and resident clothing, followed the soiled-to-clean flow and passed four state surveys with no laundry findings. Current on bloodborne pathogens training.
Careful, quick worker looking for a first laundry finishing job. Two years of home and volunteer ironing for a 40-person church catering group, handling linens, aprons and shirts. Knows fabric care labels, iron temperature settings and how to press a collar and cuff without creasing. Available for early shifts and weekends.
Hotel housekeeper with 4 years in a 220-room property, including two years running the on-site laundry: 30 loads a day, plus ironing banquet linen and staff uniforms. Used to standing shifts, timed room targets and hotel linen specs. Moving into full-time finishing work.
Ironer job duties on a resume: weak vs. strong bullets
Most laundry resumes copy the job posting back: ironed garments, folded linen, maintained a clean work area. The manager wrote that posting. What they want is how many, how well and on which machine. Here are eight typical lines rewritten.
| Weak (duty only) | Strong (volume, quality, machine) |
|---|---|
| Ironed clothes and linens. | Finished 700–800 uniform pieces a shift on a form finisher and utility press, holding rework under 2% against a 4% target. |
| Operated pressing machines. | Ran shirt unit, legger, topper and utility press, switching setups 6–8 times a shift for cotton, wool and polyester blends. |
| Worked on the ironer. | Fed a three-roll flatwork ironer at 900–1,100 sheets an hour as part of a two-person feed team, with under 1% re-feeds for wrinkles or folds. |
| Made sure garments looked good. | Checked every jacket against the account's finish spec (crease placement, collar shape, no shine on dark fabric) before it went on the rail. |
| Removed stains when needed. | Spotted protein, tannin and oil stains on the board using the store chemical chart, saving about 15 garments a week from reprocessing. |
| Kept the work area clean and safe. | Followed lockout/tagout for daily head cleaning and pad changes; zero recordable injuries in 5 years on heated equipment. |
| Helped train new staff. | Trained 6 new pressers on two-hand controls, guarding and finish standards; all 6 passed their 30-day production review. |
| Sorted and bagged finished orders. | Assembled, bagged and tagged 60–80 customer orders a day and matched them to tickets, with no mis-delivered orders in 18 months. |
Start with an example, finish in minutes.
No sign-up to start. Download works. One-time $12 for a clean PDF, no subscription.
Skills to put on an ironer resume
Split the skills section in two: equipment you can run, and what you know about fabric and process. Keep it to things you could be tested on tomorrow.
- Equipment: flatwork ironer (mangle), utility press, legger, topper, form finisher, steam tunnel, shirt unit, hand iron and steam board, spotting board, tunnel washer, dryer and folder.
- Fabric knowledge: cotton, linen, wool, silk, viscose and polyester blends; care label symbols; which fabrics shine, scorch or need a press cloth; how to handle pleats, linings and interfacing.
- Process: finish specs by account, garment inspection, tagging and assembly, FIFO rail order, rework handling, production counts and downtime logs.
- Safety: machine guarding, two-hand controls, lockout/tagout, PPE, steam and burn hazards, bloodborne pathogens procedure in healthcare laundry, safe cart and truck loading.
- Reliability: shift flexibility, early starts, standing for 8 hours, lifting 25–50 lb, peak-season overtime.
Soft skills only earn a place if a bullet backs them up. "Attention to detail" means nothing on its own; "checked every jacket against the account finish spec" is the same claim with proof.
Ironer resume with no experience
Most laundry plants and dry cleaners will train you. They are not looking for a career history, they are looking for someone who turns up, works at a steady pace and does not ruin the goods. Build the page around those three things.
- 1Put an objective of two lines instead of a summary: the shift you want, the pace you can work at, and any hands-on ironing you have done at home, in volunteering or in a family business.
- 2Add a short section called "Hands-on skills" with what you genuinely know: reading care labels, iron temperature settings, pressing collars and cuffs, hanging and folding, sorting by color and fabric.
- 3List any work that proves stamina and reliability: kitchen porter, warehouse picking, cleaning, farm or packing work. Include hours per shift and attendance.
- 4Say clearly that you are available for early or split shifts and for a paid trial shift. In this trade a trial is normal and it is often how you get hired.
- 5Keep it to one page and hand-deliver a printed copy to the plant or store. Many small dry cleaners never post online and hire the person standing in front of them.
Reliable worker seeking a full-time laundry finishing role on first or second shift. Comfortable on my feet for a full shift and used to a set pace from two years of packing-line work. Have ironed shirts, aprons and table linen weekly for a 40-person catering group and know care labels and iron settings. Happy to start with a trial shift.
Packing line operator, food packing plant, 2024–2026: worked a 10-hour standing shift at a 45-case-per-hour line rate with 99% attendance over 14 months; passed the plant's hygiene and machine-guarding training.
Volunteer laundry helper, community center: washed, ironed and folded about 60 pieces of table linen and 30 aprons a week for weekly events over two years, including stain treatment on wine and grease marks.
Training, cards and safety records worth listing
There is no license to iron clothes in the US. That means the few pieces of paper you do have stand out, and so does a clean safety record.
- OSHA 10-Hour General Industry card. Not required, but it shows a plant you understand guarding and lockout/tagout. Many employers pay for it.
- Forklift (powered industrial truck) certification. Useful in plants that move carts and bulk goods. It is employer issued and site specific, so list the year and note that it needs re-evaluation every three years.
- Bloodborne pathogens training. Standard and annual in healthcare and hospital linen work. Say the year you last did it.
- Employer machine training. "Certified on flatwork ironer feed and shirt unit, in-plant training 2023" is a real, checkable line. Do not dress it up as a national qualification.
- Industry courses. The Drycleaning and Laundry Institute (DLI) runs training for dry cleaning staff. If your employer paid for a course, name it and the year. If you did not take one, leave the section out rather than inventing a title.
- In the UK, look for an NVQ or apprenticeship in laundry and dry cleaning operations. US employers will not know it, so add one line of plain explanation next to it.
Format and length for an ironer resume
- One page. Always. Two pages for a laundry finishing job reads as padding.
- No photo, no date of birth, no marital status. That is the US and UK convention, even though it is common on resumes from other countries.
- Put your shift availability in the header or the summary. "Available 5 a.m. starts, weekends, overtime in season" belongs where the manager sees it in the first three seconds.
- Plain layout, one column, black text, no icons or skill bars. Many plants print the resume and pass it around the floor, and some scan it into a basic hiring system.
- Save as PDF unless the posting asks for Word. Name the file Firstname-Lastname-Presser.pdf.
- Include a phone number you answer during the day. In this trade the callback often comes within hours, and the second name on the pile gets it if you miss the call.
Words to mirror from the job posting
Large laundry groups, hospital systems and hotel chains screen with software. Small dry cleaners do not. Write for both by using the posting's own words in your bullets, not in a keyword list at the bottom.
- Titles to mirror: presser, garment presser, finisher, laundry attendant, laundry operative, ironer, pressing operator.
- Equipment words: flatwork ironer, mangle, steam tunnel, form finisher, topper, legger, shirt unit, utility press, spotting board.
- Process words: finish spec, rework, piece count, pieces per hour, sort, tag, assembly, FIFO, soiled to clean.
- Compliance words that appear in healthcare and hotel postings: PPE, lockout/tagout, bloodborne pathogens, chemical handling, safety data sheets.
- Availability words: first shift, second shift, weekend availability, overtime, seasonal peak.
Frequently asked questions
How do I write an ironer resume?
Start with the posting's job title, your shift availability and a three-line summary with years, machines and a piece count. Then list two or three jobs with bullets that each carry a number: pieces per hour, rework rate, attendance. Add a skills block naming the machines you can run. Keep it to one page.
What skills should an ironer put on a resume?
Name the machines first: flatwork ironer, utility press, form finisher, shirt unit, steam tunnel, hand iron and spotting board. Then fabric knowledge (which materials shine, scorch or need a press cloth), finish specs and inspection, and safety items like lockout/tagout and PPE. Add shift flexibility and lifting capacity at the end.
Can I get a laundry or pressing job with no experience?
Yes, most plants and dry cleaners train on the job and hire on a trial shift. Use an objective instead of a summary, list any standing, paced work you have done, and describe home or volunteer ironing honestly, including fabrics and volumes. Say you are available for a trial shift.
How long should an ironer resume be?
One page. Even with fifteen years in laundry, the manager only needs your machines, your output, your safety record and your availability. Cut old jobs down to a single line each once they are more than ten years back.
Should I write "ironer" or "presser" on my resume?
Use whichever word the job posting uses in your headline, and mention the other once inside your job history. Ironer and laundry operative are the usual UK terms; presser, finisher and laundry attendant are the usual US ones. Matching the posting helps with both the software and the manager.
What numbers can I put on a laundry resume if nobody tracked mine?
Estimate carefully from things you do know: loads or pounds a day, garments on the rail at the end of a shift, orders bagged, complaints in a month, months without a damage claim. Round down and say "about". A believable estimate is better than no number, and far better than one you cannot defend on a trial shift.
Ready to write yours?
The builder suggests a summary from your own experience, then checks it against the job posting.
How this page was made: a first draft was written with AI assistance from cvplex's example library, then edited and fact-checked by the cvplex Careers Team. Examples are fictional composites; numbers are illustrative. Report an error via the editorial policy page.